Relay Switch 1x3kW单路模块

auto_101.jpg

Relay Switch 1x3kW FGS-211
单回路大功率灯光控制模块

Product Overview:
Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switchboxes, or anywhere else where it is necessary to operate an electric device of 3,0kW power output. Fibaro On/Off Relay Switch can switch on or off connected device either through radiowaves or through the wall switch connected directly to it.

Product Highlights:
• Controlled through other Fibaro devices or any Z-Wave controller,
• Microprocessor controlled,
• Our ON/OFF Relay Switch is the smallest device of the type in the World!

我们的所有产品是世界上该类型设备中体积*小的模块!


Technical Data:
• Power Source 110V - 230V +/-10% 50/60Hz,
• Max. AC output: 16A / 230V 50/60Hz,
• Max. DC output: 16A / 30V,
• Max. power output (resistive loads only) 3 kW (in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage),
• Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use),
• Overheating protection: safety off at 105oC,
• Ambient temperature: 10oC - 40oC,
• To be mounted in standard wall switch boxes Ø ≥50mm,
• Radio protocol: Z-Wave,
• Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU,
• Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure),
• Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

auto_102.jpg